-
Safescan TA-8000 series Time Clock Systems
- MY TA DEVICE DOES NOT APPEAR AS "CONNECTED" IN THE SOFTWARE (Safescan TA-8000)
- Changing the language (Safescan TA-8000)
- Create a user (Safescan TA-8000)
- CONNECTING YOUR TA TERMINAL WITH WI-FI (Safescan TA-8000)
- USING THE FINGERPRINT AND RFID-READER (Safescan TA-8000)
- LOCATING THE SERIAL NUMBER OF YOUR TERMINAL (Safescan TA-8000)
- REGISTERING FINGERPRINTS AND A BADGE FOR THE SAME USER (Safescan-TA-8000)
- COMPATIBLE USB STICKS FOR YOUR TA TERMINAL (Safescan TA-8000)
- INCREASING FINGERPRINT RECOGNITION SPEED (Safescan TA-8000)
- DO SAFESCAN TERMINALS USE A MIFARE READER? (Safescan TA-8000)
-
+ 10...
-
Safescan TA / TA+ PC Software
- Installing the Safescan TA software
- Activating the Safescan TA software
- Upgrading from a trial to a licensed version (Safescan TA Software)
- Changing the language of the Safescan TA software
- License key error (Safescan TA Software)
- Changing the password in the Safescan TA software
- My TA is visible on the network but not in the TA-software.
- Setting-up a workschedule (Safescan TA Software)
- Preventing double clocking data (Safescan TA Software)
- Rounding clocking hours (Safescan TA Software)
-
+ 23...
- Safescan TA / TA+ PC Software – End of Life
- Safescan Time Attendance - End of Life
- Firmware Update
COMPATIBLE USB STICKS FOR YOUR TA TERMINAL (Safescan TA-8000)
In order for your USB stick to be compatible with your TA terminal, it has to meet the two following conditions:
• The stick has to be formatted in FAT or FAT32.
• The firmware of the memory stick has to be compatible with Linux Kernel 2.4.x. You can find this information on the packaging of your memory stick, or on the manufacturer's website.
• The stick has to be formatted in FAT or FAT32.
• The firmware of the memory stick has to be compatible with Linux Kernel 2.4.x. You can find this information on the packaging of your memory stick, or on the manufacturer's website.
Was this article helpful?