-
Safescan TA-8000 series Time Clock Systems
- MY TA DEVICE DOES NOT APPEAR AS "CONNECTED" IN THE SOFTWARE (Safescan TA-8000)
- Changing the language (Safescan TA-8000)
- Create a user (Safescan TA-8000)
- CONNECTING YOUR TA TERMINAL WITH WI-FI (Safescan TA-8000)
- USING THE FINGERPRINT AND RFID-READER (Safescan TA-8000)
- LOCATING THE SERIAL NUMBER OF YOUR TERMINAL (Safescan TA-8000)
- REGISTERING FINGERPRINTS AND A BADGE FOR THE SAME USER (Safescan-TA-8000)
- COMPATIBLE USB STICKS FOR YOUR TA TERMINAL (Safescan TA-8000)
- INCREASING FINGERPRINT RECOGNITION SPEED (Safescan TA-8000)
- DO SAFESCAN TERMINALS USE A MIFARE READER? (Safescan TA-8000)
-
+ 10...
-
Safescan TA / TA+ PC Software
- Installing the Safescan TA software
- Activating the Safescan TA software
- Upgrading from a trial to a licensed version (Safescan TA Software)
- Changing the language of the Safescan TA software
- License key error (Safescan TA Software)
- Changing the password in the Safescan TA software
- My TA is visible on the network but not in the TA-software.
- Setting-up a workschedule (Safescan TA Software)
- Preventing double clocking data (Safescan TA Software)
- Rounding clocking hours (Safescan TA Software)
-
+ 22...
- Safescan TA / TA+ PC Software – End of Life
- Safescan Time Attendance - End of Life
- Firmware Update
ACCESSING MY DEVICE FROM A REMOTE LOCATION (Safescan TA-8000)
The software and the device communicate through the following port: TCP 4370.
You need to make sure that communication through this port is open on your router on the site where the TA is installed.
From the software: In the device list, instead of pointing to a local IP address, you need to indicate the public IP address of the location where your TA is installed.
Since the software is pointing to an IP address, you need to have a static IP address on the TA site.
You need to make sure that communication through this port is open on your router on the site where the TA is installed.
From the software: In the device list, instead of pointing to a local IP address, you need to indicate the public IP address of the location where your TA is installed.
Since the software is pointing to an IP address, you need to have a static IP address on the TA site.
How did we do with this article?